Diploma in English (Academic) – Christchurch Polytechnic Institute of Technology, New Zealand
Bachelor of Software & Information Technology (Honours) – Lincoln University, New Zealand
Graduate Diploma in Information & Communication Technology (with Distinction) – Christchurch Polytechnic Institute of Technology, New Zealand
Postgraduate Diploma in Marketing, Chartered Institute of Marketing (CIM), United Kingdom
Master of Science (Dentistry) – Universiti Sains Malaysia.
MSc title :- Intracranial Volume Measurement for Pre- and Post-Operative Decompressive Craniectomy based on Computed Tomography Brain Images using Open Source Framework
Nominated among 8 nominees (from UiTM, UKM, UM and USM) for Deans Scientific Merit research Awards, abstract DA3 (A Rapid and Reliable Method of Intracranial Volume Measurement for Pre- and Post-Operative Decompressive Craniectomy) – http://repository.um.edu.my/39659/1/Abstracts%20For%20Deans%20Scientific%20Merit%20Research%20Award.pdf
Currently a PhD candidate with USM School of Dental Sciences (Craniofacial Prosthesis)
Currently a full time PhD student with Universiti Sains Malaysia – Craniofacial Imaging / 3D reconstruction / Medical image processing / Open source applications
Honorary Secretary – International Association for Dental Research (IADR), Malaysian Section (2014/2016 and 2016/2018)
Secretary Editor – Malaysian Society for Computed Tomography and Imaging Technology (MyCT) Publication & Promotion Committee (2013-2015)
Chairman – Malaysian Chinese Muslim Association (MACMA), Kelantan (2013-current)
Chairman – Gabungan NGO Kelantan (2016-current)
Chairman – Koperasi MACMA Kelantan Berhad (2017-current)
Committee member – Konfederansi NGO Kelantan (2016-current)
Committee member – Muslim Welfare Organisation Malaysia (PERKIM), Kelantan Division (2011-current)
Deputy Chairman – Muslim Welfare Organisation Malaysia (PERKIM), Wakaf Bharu Branch (2016-current)
ICT Project Coordinator – Kelantan Foundation for the Disabled (YOKUK), permanent volunteer (2002 – current)
Committee member – Parents and Teachers Association (Ketua Biro Perhubungan & Publisiti), Sekolah Menengah Kebangsaan Kubang Kerian (2016/2018)
Committee member – Ikatan Kasih OP (Welfare Committee), Old Putera Association (2016-current)
Secretary – Gabungan NGO Kelantan (2014-2016)
Vice President – Malaysian Chinese Muslim Association (MACMA), National Committee (2011-2013)
Member – Christchurch Crimewatch Incorporated (2008-2010)
National Council Member – Muslim Welfare Organisation Malaysia (PERKIM), National Committee (2005-2007)
Honorary Secretary – Malaysian Chinese Muslim Association (MACMA), Kelantan (2004-2007)
Committee member – Islamic Outreach ABIM (IOA), Kelantan (2004-2007)
President – Rotaract Club of Kota Bharu (2003-2005)
Co-supervising four USM undergraduate dental students in 2012. One of the projects has won the first prize in the poster competition at the 5th National Dental Students’ Scientific Conference in 2013 at International Medical University (IMU), Kuala Lumpur.
Co-supervising two USM undergraduate dental students in 2015. They won 1st place in Oral Presentation (Clinical) at the 13th Student Scientific Conference, School of Dental Sciences, USM on the 17th December 2015.
Co-supervising one USM undergraduate dental student in 2018. Chong Wei Lerg. Research title: Morphometric and geometric analysis of orbital bone and sexual dimorphism of human skull based on CT images.
MMed Neurosurgery (2016-2019). Dr Shukriyah Sulong. Thesis title:
MMed Neurosurgery (2015-2018). Dr Low Peh Hueh. Thesis title: Patient-specific reconstruction utilizing computer assisted 3D modelling for partial bone flap defect in cranioplasty.
MMed Orthopaedics (2015-2018). Dr. Hazizul Helmy Hamad @ Ahmad. Thesis title: Donor site morbidity in periosteal graft-animal study.
MMed Orthopaedics (2014-2017). Dr. Tuan Muhd Fairuz Tuan Ismail. Thesis title: A pilot study on bone formation by different type of non-vascularised periosteal graft on rabbit model (Selected as one of five finalists for the Mahmood Merican Best Masters Thesis Award).
MDentSurg (2013-2016). Dr. Jaswinder Singh. Thesis title:
MDentSurg (2013-2016). Dr. Tengku Aszraf. Thesis title:
MMed Neurosurgery (2009-2012). Dr Arvind Martin. Thesis title:
Invited to review journal articles for:-
- Journal of Industrial Technology (SIRIM) – http://johariyap.com/wp-content/uploads/2016/08/Sirim-review-JY.jpg
- PeerJ (Impact Factor 2.111) – https://peerj.com/johariyap/
Book chapter (2012) – Tumour visualization and reconstruction from CT data applying open source tools. Progress in process tomography: Colloqium 2012. (chapter 7, pp. 49-70)
USM Magazine (2014) – Biomodelling and biomaterial implants and prostheses for craniomaxillofacial reconstruction. Advanced Research Initiatives. (volume 5, pp. 8-9)
MSc thesis (2014) – Intracranial volume estimation for decompressive craniectomy patients based on computed tomography images using open source framework
Maya Genisa, Zainul A. Rajion, Dasmawati, Abdullah Pohchi, Johari Yap, Mohammed Rafiq (2014). Preoperative Bone Assessment Using Cone Beam Computed Tomography (CBCT). International Medical Journal, 21(4), 412-415 [Scopus Indexed]
Johari Yap Abdullah, Mary Chieng Ching Ru, Lee Geok Fong, Abdullah Pohchi, Azlan Jaafar, Zainul Ahmad Rajion (2014). Volumetric Assessment of Ameloblastoma Applying Open Source Software and ABC/2 Estimation Technique. International Medical Journal, 21(5), 487-489 [Scopus Indexed]
Arvind G. Martin, Johari Yap Abdullah, Azlan Jaafar, Abdul Rahman Izaini Ghani, Zainul A. Rajion, Jafri Malin Abdullah (2014). Addition of zygomatic arch resection in decompressive craniectomy. Journal of Clinical Neuroscience. 22(4), 735-739 [Impact factor – 1.318] http://www.sciencedirect.com/science/article/pii/S0967586814006365
Johari Yap Abdullah, Zainul Ahmad Rajion, Marzuki Omar (2015). Biomodelling of Cranio-maxillofacial Implant Applying Open Source Software. Jurnal Teknologi, 76(7), 57-61 [Scopus Indexed]. http://www.jurnalteknologi.utm.my/index.php/jurnalteknologi/article/view/5715
Haider Ali Hassan, Mohammad Khursheed Alam, Johari Yap Abdullah, Junzaburo Nakano, Tatsunori Yusa, Asilah Yusof, Naoto Osuga (2016). 3D CT Morphometric Analysis of Sells Turcica in Iraqi Population. Journal of Hard Tissue Biology 25(3), 227-232 [Impact factor – 0.316]. https://www.jstage.jst.go.jp/article/jhtb/25/3/25_227/_article/-char/ja/
Jaswinder Singh, Roselinda Ab Rahman, Zainul Ahmad Rajion, Johari Abdullah, Irfan Mohamad (2016). Orbital Morphometry: A Computed Tomography Analysis. Journal of Craniofacial Surgery. 28(1), e64-e70; doi: http://10.1097/SCS.0000000000003218 [Impact factor – 0.74].
Nur Adilah Kamarrudin, Noorshahida Abu Tholib, Sulaini Mat Il, Johari Yap Abdullah, Suliana Shamsuddin Alias, Teguh Haryo Sasongko (2016). Promoting Public Awareness in Genetic Disorder through Social Media. Osaka University Knowledge Archieve. http://ir.library.osaka-u.ac.jp/dspace/handle/11094/57391 [International Journal]
Low Peh Hueh, Johari Yap Abdullah, Abdul Manaf Abdullah, Suzana Yahya, Zamzuri Idris, Dasmawati Mohamad (2016). Patient-specific reconstruction utilizing computer assisted 3D modelling for partial bone flap defect in hybrid cranioplasty. AIP Conference Proceedings 1791, 020020 (2016); doi: http://dx.doi.org/10.1063/1.4968875 [Scopus Indexed]
Johari Yap Abdullah, Marzuki Omar, Helmi Mohd Hadi Pritam, Adam Husein, Zainul Ahmad Rajion (2016). Comparison of 3D reconstruction of mandible for pre-operative planning using commercial and open-source software. AIP Conference Proceedings 1791, 020001 (2016); doi: http://dx.doi.org/10.1063/1.4968856 [Scopus Indexed]
Tengku Noor Daimah Tengku Din, Nafij Jamayet, Zainul Ahmad Rajion, Norhayati Luddin, Johari Yap Abdullah, Abdul Manaf Abdullah, and Suzana Yahya (2016). Design and fabrication of facial prostheses for cancer patient applying computer aided method and manufacturing (CADCAM). AIP Conference Proceedings 1791, 020003 (2016); doi: http://dx.doi.org/10.1063/1.4968858 [Scopus Indexed]
Abdul Majeed, Abd Rahni Mt Piah, Zainor Ridzuan Yahya, Johari Yap Abdullah, Muhammad Rafique (2017). Construction of occipital bone fracture using B-spline curves. Computational and Applied Mathematics. 5(14), 1-20 doi: 10.1007/s40314-017-0487-0 [Impact factor – 0.961]
Nafij B Jamayet, Yap J Abdullah, Zainul A Rajion, Adam Husein, Mohammad K Alam (2017).New Approach to 3D Printing of Facial Prostheses Using Combination of Open Source Software and Conventional Techniques: A Case Report. The Bulletin of Tokyo Dental College. 58(2), 117-124; doi: http://doi.org/10.2209/tdcpublication.2016-0021 [PubMed Indexed]
Abdul Majeed, Abd Rahni Mt Piah, Muhammad Rafique, Johari Yap Abdullah, Zainul Ahmad Rajion (2017). NURBS curves with the application of multiple bones fracture reconstruction. Applied Mathematics and Computation. 315, 70-84. [Impact factor – 1.738]
Nafij Bin Jamayet, Johari Yap Abdullah, Ahmed Mushfiqur Rahman, Adam Husein, Mohammad Khursheed Alam (2018). A fast and improved method of rapid prototyping for ear prosthesis using portable 3D laser scanner. Journal of Plastic, Reconstructive & Aesthetic Surgery (In Press, Accepted Manuscript). https://doi.org/10.1016/j.bjps.2018.02.003 [Impact factor – 2.048]
Johari Yap Abdullah, Zainul Ahmad Rajion, Marzuki Omar (2015). Biomodelling of Cranio-Maxillofacial Implant Applying Open Source Software (Oral) presented at 4th International Conference on Advances in Mechanical Engineering on 26-27th August 2015 at Patra Jasa Bali Resort and Villas, Indonesia.
Johari Yap Abdullah, Suliana Shamsuddin Alias, Noorshahida Abu Tholib, Nur Adilah Kamaruddin, Ahmad Yusdirman Yusoff, Teguh Haryo Sasongko (2016). Mobile Applications and Web-Based Technology in Enhancing Yokuk Performance and Productivity (Oral) presented at International Conference on Knowledge Transfer (ICKT) on the 1st of December 2015 at Putrajaya.
Jamayet N, Johari Y, Abdullah JY, Yahya S, Rajion ZA, Alam MK (2016) – A CT Scan Analysis of Prosthetic Outcome of Customized Ocular Prosthesis in Congenital and Acquired Defect: An Innovation of Maxillofacial Prosthetic Unit, School of Dental Science, USM (Poster) presented at 15th IADR Malaysian Section Annual Scientific Meeting on the 5th of February 2016 at UKM, KL.
Tengku Daimah Tengku Din, Nafij Jamayet, Zainul Ahmad Rajion, Norhayati Luddin, Johari Yap Abdullah, Abdul Manaf Abdullah, Suzana Yahya (2016). The Integration of CADCAM in the Fabrication of Ear Prosthesis (Poster) presented at Regional Conference on Maxillofacial Prosthodontics 2016 on the 8th of August 2016 at Faculty of Dentistry, UM.
Johari Yap Abdullah, Marzuki Omar, Helmi Mohd Hadi Pritam, Adam Husein, Zainul Ahmad Rajion (2016). Comparison of 3D reconstruction of mandible for pre-operative planning using commercial and open-source software (Oral) presented at Translational Craniofacial Conference 2016 on the 11th of August 2016 at Sains@USM, Penang.
Johari Yap Abdullah, Zainul Ahmad Rajion, Adam Husein, Helmi Hadi (2017). Comparison of Commercial and Three Open-Source Medical Imaging Software for Reconstruction of 3D Skull Models from Computed Tomography Data. Postgraduate Research Day 2017 in conjunction with 14th Student Scientific Conference 2017, 27 April 2017, School of Dental Sciences, USM Health Campus, Kelantan. (won 1st prize)